See reference from a commercial laundry
Our product range comprises a wide number of standard plants, all engineered and manufactured in-house. The starting point is our modular-built standard system ensuring high flexibility, high reliability in operation, and short delivery time. Each solution can be customized and built according to the specific application by adapting the choice of material, instrumentation, and control system - based on our combined know-how.
Standard plants are available as one-tank or two-tank units for continuous water production. Each tank has individual valves to ensure reliable operation. All plant types come with a brine tank.
Several of the plant types are available for treatment of both cold (max. 35 oC) and hot water (max. 85 oC). The plants for hot-water softening is especially suited for sanitary installations.
Pipe system: PVC or PP
As standard design, STFA softening plants are supplied with a nozzle plate. It ensures optimum utilization of salt and an even distribution of water both during operation and backwash. All STFA plants are also supplied with a brine maker for automatic production of brine.
The softening plant type SMP is specifically designed for applications which demand high reliability of operation. The construction of the plant and the pipe system result in a low pressure loss and consequently less energy consumption.
The plants are equipped with automatic, pneumatically actuated ball valves – if supply of electricity and air is not available, the valves are closed.
Download leaflet to read more about the features of the softening plant SMP.
The filter tanks are of steel and therefore less susceptible to changes in pressure. The tanks are coated with polyethylene. Thus, the filter tanks combine the strength of steel with the strong anticorrosion property of synthetic material.
Our patented five-cycle valve is made of high-quality synthetic material and has few movable parts. Taken together, this endows the valve with reliable operation, long life and minimum maintenance.
As standard, the pipe system is supplied as PVC or PP with the quality of being corrosion-proof and resistant to chemicals. The pipe system can also be customized in several other plastic types or stainless steel. Steel is a robust material that endures very high temperatures.
Each softening plant comes with a standard PLC control. Our controls are purpose-made and individually programmed by our own engineers. The simple user interface facilitates check of configuration parameters and control of operation and regeneration.
Three-tank plants are offered as special design with minimum two tanks in operation. Each tank has individual valves to ensure reliable operation. The picture shows a triplex softening plant at a Danish waterworks where water hardness is reduced from 30 odH to 0.5 odH and then blended with feedwater to 9 odH.
A brine maker is an automatic system for production of large quantities of brine. Typically, fewer salt fillings are needed. At the same time, an inexpensive salt type can be used. It is possible to choose a brine maker for several of the plant series.
Periodic resin disinfection is recommended in order to prevent biological growth and thereby minimizing the risk of pollution of the treated water. The Steril Soft is applicable to all EUROWATER softeners with brine tanks. One system can disinfect up to 300 litres of resin.
The quality of the softened water can be monitored by a Testomat unit analyzing the residual hardness in the water. The Testomat unit is set to an actual hardness limit. Exceeding this limit will release an alarm and start a regeneration.
Monitoring of softened water can also be done manually with our Durognost test kit. An easy and quick solution for testing the residual hardness after softening.
The quality of the salt used for regeneration can influence the performance of your softening unit. EUROWATER salt tablets are produced under controlled production conditions and are tested in our own plants. Our product is approved for food processing applications and contains typically 99.8% of sodium chloride (min. 99%).
For more information download our leaflet about high-quality salt from EUROWATER.
Plactic bag with handle
A pallet with 40 bags
Certain softening plants are supplied with conductivity meters that continuously measure the actual conductivity in the rinse water. When the ion exchanger is clean, the regeneration stops, thereby minimizing rinse water consumption.
Odense Universitetshospital is one of the largest hospitals in Denmark. The hospital chose a softening unit with conductivity meter to minimize operational cost and water consumption.
Selection of unit depends on application, water quality, and water consumption. We are at your service to ensure the optimum solution based on our combined know-how. Fill in the form and let us get back to you.